Updating mac bios
So how do you go about figuring out if you need to update the BIOS on your computer?
Well first you’ll need to figure out the current version of the BIOS.
Some computers, including Dell, show you the BIOS version number when the computer first boots up.
One of the most common uses of Flash memory is for the basic input/output system of your computer, commonly known as the BIOS (pronounced "bye-ose").
In the System Summary section, you should see an item called BIOS Version/Date. Another easy way to determine your BIOS version without rebooting the machine is to open a command prompt and type in the following command: And you’ll see several keys related to the BIOS, including System Bios Date, System Bios Version, Video Bios Date, and Video Bios Version.
for example: if your usb 3.0 hardware address is 3/0/0 you must convert it to 03-00-00-after writing coomand in CMD press enter too Flashing/Updateing your USB 3.0Flashing in progres: Flash completed: After flashing restart your computer And here Video Tuturial by me: luck Is this procedure the same for the new firmware released for u PD720201/u PD720202?
However, after inspecting the newer firmware it appears it was built just 5 months after the last one. It was posted on Station Drivers on April 28th, 2015.
Need to find or check the current BIOS version on your laptop or desktop computer?
Resetting from Within BIOSRemoving the CMOS Battery Resetting the Jumper Community Q&A This wiki How teaches you how to reset your Windows computer's BIOS (short for Basic Input/Output Settings) to factory settings.
You can do this on most computers from the BIOS page; however, if you're locked out of your computer's BIOS, you'll need to reset the BIOS by opening your computer's housing and removing the CMOS battery from the motherboard, or--in the case of desktops--resetting the jumper switch on the motherboard.